A special thanks to Robert, at Scotrails, who write the beautifull Sandymill.
Versions for BVE 2, and classic CL 158
- Old one, low resolution, stopping at Balfearn: Route File Objects File
- New One, with new objects, new graphics, going from Sandymill to Sandymill :
Loop Ver 3.0 File (Route and objects)
Remember:
- As BVE don't start exactly on the first stop, You MUST use <F4> (open time-table) and click on DEPOT, to make routes and engine starting as they need !! - As you are starting your hard day work, you also MUST reset ATS by pressing <Insert> after the brake releasing.
Version for BVE 4.2 and CL 158 V4.20.05, translated from Loop V 3.0 for BVE 2, with new features.
Update june 2006 with fading tunnels and new tracks.
You need Cl158 BVE4 V4.23.12.05 and BrSigs (http://www.trainsimcentral.co.uk)
